Up to 30-amp continuous current with proper airflow, 35-amp peak
5-volt switch-mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
Drives up to 5 analog or 4 digital sub-micro servos with the BEC
3S–4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
Programmable soft start for helis and airplanes
Auto motor shutdown if signal is lost or there is interference
Programmable timing—5 user-selectable ranges for use with a larger variety of brushless motors
Heli mode for starting the motor with a low speed ratio
Pre-wired connectors—E-flite® EC3™ connectors on battery input and 3.5mm female gold bullets on motor output leads
Brake: |
Yes |
Continuous Maximum Current: |
30A |
Input Voltage: |
3S–4S Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage |
Input Connector Types: |
16AWG with E-flite® EC3™ connector |
Output Connector Types: |
16AWG with 3.5mm female gold bullet connectors |
Momentary Peak Current: |
35A |
Length: |
2.0 in (51mm) |
Width: |
1.1 in (28mm) |
Height: |
0.35 in (8.7mm) |
Weight: |
1.1 oz (31 g) |
BEC Voltage: |
5.5V switch-mode, 700mA continuous |