Çok satanlar

Traxxas

Body mounts, front & rear/ body mount posts, front & rear

Traxxas

Tires & wheels, assembled, glued (Geode chrome wheels, Maxx tires (6.3" outer diameter), foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall protectors, part #5665, 5666, 5667)

Traxxas

Tuned pipe, Resonator, R.O.A.R. legal, blue-anodized (aluminum, single chamber) (fits Jato, N. Rustler, N. 4-Tec, with TRX Racing Engines)

Traxxas

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Traxxas

White Revo® Wing

Traxxas

Wheel nuts, splined, 17mm (blue-anodized) (4)

Traxxas

Yoke, brake (1)/ torque pins (2)/ 4x15mm screw pin

Traxxas

Yokes, stub axle (2)/ pins (2)

Traxxas

Wing mount, center / wing washers (for Revo)

Traxxas

Suspension arm upper (1)/ suspension arm lower (1) (rear, left or right)

Traxxas

Toe link, 5.0mm steel (front or rear) (2)

Traxxas

Turnbuckles, toe links (5.0mm steel) (rear) (2)

Traxxas

Suspension arms (upper) (2) (fits all Maxx series)

Traxxas

Tie bars (front & rear)

Traxxas

Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)

Traxxas

Rudder (127.5 mm)/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/ 4x3mm BCS (stainless, with threadlock) (1)

Traxxas

Stuffing tube (assembled with liner)

Traxxas

Propeller shaft/ flex cable, DCB M41 (380.9mm)

Traxxas

Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)

Traxxas

Ribbed 2.8" Tires with foam inserts (2)

Traxxas

Response racing 3.8" Tires (soft-compound, narrow profile, short knobby design) with foam inserts (2)

Traxxas

Suspension arm upper (1)/ suspension arm lower (1) (left front)

Traxxas

Red-anodized aluminum push rod (assembled with rod ends) (2) (use with progressive-2 rockers)

Traxxas

Push rod (steel) (assembled with rod ends) (2) (use with progressive-2 rockers)

Traxxas

Skidplates, front & rear (black)

Traxxas

Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm BCS (stainless, with threadlock) (1)

Traxxas

Propeller, 42x59mm

Traxxas

Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 degree) (1 each)

Traxxas

Slipper pressure plate & hub (aluminum alloy)

Traxxas

Spacers, stub axle carrier (rear)

Traxxas

Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

Traxxas

Roll hoop/ EZ-Start plug mount

Traxxas

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Traxxas

Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring

Traxxas

Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)

Traxxas

O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)

Traxxas

O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crush washer (2)/ carburetor dust boot (1) (TRX 2.5, 2.5R)

Traxxas

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX 2.5, 2.5R)

Traxxas

Slide, carburetor (slide only for TRX 2.5, 2.5R)

Traxxas

Piston/sleeve (matched set), wrist pin clips(2) (TRX 2.5, 2.5R)

Traxxas

Screws, 2.6x8mm countersunk machine (6)

Traxxas

Stub axle, (1)/ axle sleeve (1) Revo/Maxx (steel constant-velocity driveshaft)

Traxxas

Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)

Traxxas

Nuts, 2.5mm nylon locking (12)

Traxxas

Screw pin, 2.5x18mm (6)

Traxxas

Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, 2.5R, 3.3)

Traxxas

Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring, Revo (1)/ spring, Maxx (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

Traxxas

Rod, connecting (TRX 2.5, 2.5R, 3.3)

Traxxas

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)

Traxxas

Screws, 3x12mm button-head machine (6) (starter attachment screws with Threadlock)