Traxxas Yedek Parçalar

Traxxas

Skidplates, front & rear (black)

Traxxas

Bumper, rear/ bumper mount, rear (black)

Traxxas

Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm BCS (stainless, with threadlock) (1)

Traxxas

Stuffing tube (assembled with liner)

Traxxas

Seal, stuffing tube (1)/ push rod (1)

Traxxas

MOTOR PLATE FOR SINGLE MOTOR INSTALLATION

Traxxas

Sway bars (rear) (includes soft, medium, hard)

Traxxas

Sway bars (front) (includes soft, medium, hard)

Traxxas

Sway bar kit (front and rear) (includes sway bars and linkage)

Traxxas

Brake cam

Traxxas

Propeller shaft/ flex cable

Traxxas

Input shaft (slipper shaft)/ slipper shaft spacer

Traxxas

Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/ 4x18 BCS (2)/ flathead engine mount screws 3x10 (2)

Traxxas

Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 degree) (1 each)

Traxxas

Carriers, stub axle (rear) (left & right)

Traxxas

Half shaft set, left or right (internal splined half shaft/ external splined half shaft/ rubber boot/ metal U-joints) (assembled with glued boot) (2 assemblies)

Traxxas

Fuel tank (75cc, complete)

Traxxas

Spacers, stub axle carrier (rear)

Traxxas

Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

Traxxas

Body, GTR shock (molded composite) (2)

Traxxas

Hard-anodized PTFE-coated GTR™ shock body (1)

Traxxas

Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

Traxxas

Linkage set, rear brake (Revo) (Includes: brake lever/ rod (wire)/ brake spring/ brake adjustment dial/ rod guide bushing/ screw collar)

Traxxas

Brake cam (1)/ sleeve (1)

Traxxas

Guards, steering servo (2)

Traxxas

Wrist pin, wrist pin clips (2) (TRX 3.3)

Traxxas

Cush-drive elements (4) (EZ-Start 2)

Traxxas

O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)

Traxxas

Flywheel nut (TRX 2.5, 2.5R, 3.3)

Traxxas

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX 2.5, 2.5R)

Traxxas

Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)

Traxxas

Slide, carburetor (slide only for TRX 2.5, 2.5R)

Traxxas

Wrist pin/ wrist pin clips (2) (TRX 2.5, 2.5R)

Traxxas

Piston/sleeve (matched set), wrist pin clips(2) (TRX 2.5, 2.5R)

Traxxas

Clutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Aluminum Hollow Ball Set

Traxxas

Steering and Throttle Servo horns (for non-Traxxas servos (Hitec, JR, KO, Airtronics))

Traxxas

Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))

Traxxas

Half shafts, center (internal splined (3)/ external splined (2)) (plastic parts only)

Traxxas

Cover plates and seals, forward only conversion (Revo) (Optidrive blank-out plate, Optidrive sensor cover, shift fork cover) These seals cover all of the openings in the receiver box and transmission when the forward only conversion is installed in Revo.

Traxxas

Drive cups, inner (2) Revo/Maxx (steel constant-velocity driveshafts)/screw pin, M4/15(2)

Traxxas

Tuned pipe, plastic (TRX 2.5, 2.5R, 3.3)

Traxxas

Spacers, steel (JatoTwin-Spoke wheels, front) (4)

Traxxas

Screw pin, 2.5x18mm (6)

Traxxas

Header, aluminum (T-Maxx) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Traxxas

Ball bearings, blue rubber sealed (10x15x4mm) (2)

Traxxas

Ball bearings, blue rubber sealed (5x10x4mm) (2)

Traxxas

Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)

Traxxas

Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/ spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)