Traxxas Yedek Parçalar

Traxxas

Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)

Traxxas

Idler gear, steel (30-tooth)

Traxxas

Suspension arms, left & right

Traxxas

Gear, 16-T pinion (48-pitch) / set screw

Traxxas

Gear, 2nd (optional)(41-tooth)

Traxxas

Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)

Traxxas

Suspension arms, (rear) (2)

Traxxas

Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware

Traxxas

Body clips (12) (standard size)

Traxxas

Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede)

Traxxas

Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)

Traxxas

Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

Traxxas

Suspension arms (front) (2)

Traxxas

Gear, pinion (28-tooth) (48-pitch)/ set screw

Traxxas

Screws, 3x6mm flat-head machine (hex drive) (6)

Traxxas

Stub axles, rear (2)

Traxxas

Shaft, starter (TRX 2.5, 2.5R, 3.3)

Traxxas

Piston/sleeve (matched set), wrist pin clips(2) (TRX 3.3)

Traxxas

Rod ends, Revo (large) with hollow balls (12)

Traxxas

Servo saver

Traxxas

Output gears, forward & reverse/ drive dog carrier

Traxxas

Driveshaft assembly (1) left or right (fully assembled, ready to install)/ 3x10mm screw pin (1)

Traxxas

Spring, shock (GTR) (2.22 rate, black) (1 pair)

Traxxas

Spring, shock (GTR) (2.06 rate, tan) (1 pair)

Traxxas

Spring, shock (GTR) (1.76 rate, orange) (1 pair)

Traxxas

Wing mount/ hardware (1/16 E-Revo)

Traxxas

Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin)

Traxxas

Ring gear, differential/ pinion gear, differential

Traxxas

Differential assembly, complete

Traxxas

Cover, gear/ motor mount hinge post/ 3x8mm CS with split and flat washers (1)/ 3x8mm BCS (1)

Traxxas

Body, GTR shock (molded composite) (2)

Traxxas

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Traxxas

Motor mount, finned aluminum

Traxxas

Half shafts, center front (1), center rear (1) (internal splined half shafts (2)/external splined half shaft) (2))/ metal u-joints (4)

Traxxas

Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front & rear/ 2.5x18mm CS (4)

Traxxas

Push rod (molded composite) (red) (4)/ hollow balls (8)

Traxxas

Tuned pipe, Resonator, R.O.A.R. legal, blue-anodized (aluminum, single chamber) (fits Jato, N. Rustler, N. 4-Tec, with TRX Racing Engines)

Traxxas

Servo mounts, steering (left & right)

Traxxas

Resonator Tuned pipe, dual-chamber, R.O.A.R. legal (enhances mid to high-rpm power) (for Jato, N. Rustler, N. 4-Tec with TRX Racing Engines)

Traxxas

Brake pad set (inner and outer calipers with bonded friction material)

Traxxas

Suspension arm upper (1)/ suspension arm lower (1) (left front)

Traxxas

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Traxxas

Spacer, pushrod (aluminum, blue) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)

Traxxas

Spacer, pushrod (aluminum, red) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)

Traxxas

Bulkheads (L&R) (rear) (grey)

Traxxas

Screws, 2.5x8mm cap-head machine (6)

Traxxas

Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

Traxxas

Servo case/ gaskets (for 2080 micro waterproof servo)

Traxxas

Shock tower - rear

Traxxas

Chassis braces, lower machined 6061-T6 aluminum (blue) (2)/ hardware