Spare part of the car

Traxxas

Body clips (12) (standard size)

Traxxas

Steering blocks, left & right (2) (requires 5x11x4mm bearings)

Traxxas

Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

Traxxas

TRX-4M Utility Trailer

Traxxas

Servo gears (for 2055, 2056 servos)

Traxxas

Gear set (for 2070, 2075 servos)

Traxxas

Caster blocks (L&R) (30-degree)

Traxxas

TRX-4M Led Işıklı Ön Bar

Traxxas

TRX-4M Ford Bronco Işık Kiti

Traxxas

Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)

Traxxas

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Traxxas

Spur gear, 45-tooth

Traxxas

Pivot balls (4)/ pivot ball caps (4)

Traxxas

TRX-4M Aksesuar Alüminyum Ön Tampon

Traxxas

TRX-4M Tampon Alüminyum D-Ring

Traxxas

Bumper, front

Traxxas

Caster blocks (c-hubs), left & right

Traxxas

Caster blocks (portal drive), left & right/ kingpin bushings (4)

Traxxas

Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Traxxas

Seal kit, receiver box (includes o-ring, seals, and silicone grease)

Traxxas

Suspension arm upper (1)/ suspension arm lower (1) (left front) (fits Slayer Pro 4x4)

Traxxas

Shoulder screws, Ultra Shocks (3x12 hex drive) (6)

Traxxas

Wheel hubs, hex (2)/ stub axle pins (2)

Traxxas

Gear set (for 2080 micro waterproof servo)

Traxxas

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Traxxas

Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2)

Traxxas

Suspension arm upper (1)/ suspension arm lower (1) (right front) (fits Slayer Pro 4x4)

Traxxas

Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)

Traxxas

Spur gear, 40-tooth (1.0 metric pitch)

Traxxas

Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)

Traxxas

Gear, 26-T pinion (48-pitch)/set screw

Traxxas

Servo saver

Traxxas

Ring gear, differential/ pinion gear, differential

Traxxas

Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)

Traxxas

Spur gear, 38-tooth (1.0 metric pitch)

Traxxas

Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

Traxxas

Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)

Traxxas

TRX-4M Sergileme Standı

Traxxas

TRX-4M Lastik - BFGoodrich® Mud-Terrain™

Traxxas

TRX-4® Land Rover® Defender® LED Işık Kiti

Traxxas

TRX-4 1979 Ford® Bronco LED Kiti

Traxxas

Half shafts, left or right (1/16 Slash)(internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)

Traxxas

Tires & wheels, assembled, glued (3.8" black wheels, Sledgehammer® tires, foam inserts) (2)

Traxxas

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Traxxas

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Traxxas

Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Traxxas

Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (TRX 2.5, 2.5R, 3.3)

Traxxas

Wheel hubs, hex (tall offset, Rustler®/Stampede® front) (2)/ axle pins (2.5x10mm) (2)

Traxxas

Gear, 14-T pinion (48-pitch)/ set screw

Traxxas

Steering blocks, left & right