Spare part of the car

Traxxas

Brake disc (40mm steel)

Traxxas

Guards, steering servo (2)

Traxxas

Wrist pin, wrist pin clips (2) (TRX 3.3)

Traxxas

Control box battery cover w/ belt clip (EZ-Start 2)

Traxxas

Cush-drive elements (4) (EZ-Start 2)

Traxxas

Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo air filter base (angled)/wire mount/hardware (1 each) (TRX 2.5, 2.5R, 3.3)

Traxxas

O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)

Traxxas

O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7 .8x.6mm crush washer (2)/ carburetor dust boot (1) (TRX 2.5, 2.5R)

Traxxas

Flywheel nut (TRX 2.5, 2.5R, 3.3)

Traxxas

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX 2.5, 2.5R)

Traxxas

Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)

Traxxas

Slide, carburetor (slide only for TRX 2.5, 2.5R)

Traxxas

Wrist pin/ wrist pin clips (2) (TRX 2.5, 2.5R)

Traxxas

Piston/sleeve (matched set), wrist pin clips(2) (TRX 2.5, 2.5R)

Traxxas

Clutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Screws, 2.6x8mm countersunk machine (6)

Traxxas

Stub axle, (1)/ axle sleeve (1) Revo/Maxx (steel constant-velocity driveshaft)

Traxxas

Aluminum Hollow Ball Set

Traxxas

Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Traxxas

Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))

Traxxas

Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)

Traxxas

Half shafts, center (internal splined (3)/ external splined (2)) (plastic parts only)

Traxxas

Nuts, 2.5mm nylon locking (12)

Traxxas

Cover plates and seals, forward only conversion (Revo) (Optidrive blank-out plate, Optidrive sensor cover, shift fork cover) These seals cover all of the openings in the receiver box and transmission when the forward only conversion is installed in Revo.

Traxxas

Driveshaft, steel constant-velocity, Revo/Maxx (shaft only, 128.5mm)/ drive cup pin (1)

Traxxas

Drive cups, inner (2) Revo/Maxx (steel constant-velocity driveshafts)/screw pin, M4/15(2)

Traxxas

Tuned pipe, plastic (TRX 2.5, 2.5R, 3.3)

Traxxas

E-clips, 1.5mm (24)

Traxxas

Spacers, steel (JatoTwin-Spoke wheels, front) (4)

Traxxas

Screw pin, 2.5x18mm (6)

Traxxas

Header, aluminum (T-Maxx) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Traxxas

Ball bearings, blue rubber sealed (10x15x4mm) (2)

Traxxas

Ball bearings, blue rubber sealed (5x10x4mm) (2)

Traxxas

Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)

Traxxas

Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/ spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)

Traxxas

Chassis braces, lower (black) (for long wheelbase chassis) (2)

Traxxas

Hanger, metal wire (for Resonator pipe in T-Maxx with long wheelbase)/ telemetry sensor wire hold-down clip

Traxxas

Wheel hubs, hex (steel)

Traxxas

Wheel hubs, hex (2)/ axle pins (2.5x12mm) (2)

Traxxas

Half shafts, long (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Traxxas

Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/ long rod ends (2)

Traxxas

Coupler, exhaust (siliconee)

Traxxas

Axle carriers/ steering blocks (2)

Traxxas

Chassis braces, lower (2) (black)

Traxxas

Screws, set (grub) 4mm (6) (with threadlock)

Traxxas

Pulleys, 15-groove (front/ rear) (2)/flanges (2)/ axle pins (2)

Traxxas

20-Groove Aluminum Pulleys

Traxxas

Pulleys, 20-groove (middle) (2)/flanges (2)/ axle pins (2)

Traxxas

Front Aluminum Pulley Shaft (blue-anodized, light-weight aluminum)