Traxxas Yedek Parçalar

Traxxas

Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)

Traxxas

Slide, carburetor (slide only for TRX 2.5, 2.5R)

Traxxas

Wrist pin/ wrist pin clips (2) (TRX 2.5, 2.5R)

Traxxas

Piston/sleeve (matched set), wrist pin clips(2) (TRX 2.5, 2.5R)

Traxxas

Clutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Aluminum Hollow Ball Set

Traxxas

Steering and Throttle Servo horns (for non-Traxxas servos (Hitec, JR, KO, Airtronics))

Traxxas

Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))

Traxxas

Half shafts, center (internal splined (3)/ external splined (2)) (plastic parts only)

Traxxas

Cover plates and seals, forward only conversion (Revo) (Optidrive blank-out plate, Optidrive sensor cover, shift fork cover) These seals cover all of the openings in the receiver box and transmission when the forward only conversion is installed in Revo.

Traxxas

Drive cups, inner (2) Revo/Maxx (steel constant-velocity driveshafts)/screw pin, M4/15(2)

Traxxas

Tuned pipe, plastic (TRX 2.5, 2.5R, 3.3)

Traxxas

Spacers, steel (JatoTwin-Spoke wheels, front) (4)

Traxxas

Screw pin, 2.5x18mm (6)

Traxxas

Header, aluminum (T-Maxx) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Traxxas

Ball bearings, blue rubber sealed (10x15x4mm) (2)

Traxxas

Ball bearings, blue rubber sealed (5x10x4mm) (2)

Traxxas

Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)

Traxxas

Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/ spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)

Traxxas

Chassis braces, lower (black) (for long wheelbase chassis) (2)

Traxxas

Hanger, metal wire (for Resonator pipe in T-Maxx with long wheelbase)/ telemetry sensor wire hold-down clip

Traxxas

Half shafts, long (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Traxxas

Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Traxxas

Bellcrank posts, aluminum (2)/ steering link threaded rod (3x25mm)/ long rod ends (2)

Traxxas

Axle carriers/ steering blocks (2)

Traxxas

Chassis braces, lower (2) (black)

Traxxas

Screws, set (grub) 4mm (6) (with threadlock)

Traxxas

Pulleys, 15-groove (front/ rear) (2)/flanges (2)/ axle pins (2)

Traxxas

20-Groove Aluminum Pulleys

Traxxas

Pulleys, 20-groove (middle) (2)/flanges (2)/ axle pins (2)

Traxxas

Front Aluminum Pulley Shaft (blue-anodized, light-weight aluminum)

Traxxas

Pulley shaft, front

Traxxas

Pulley shaft, rear

Traxxas

drive hub, clutch/ pawl & pin (installed)/spring/ set screws (2)

Traxxas

Rear hub, 2nd/ snap ring

Traxxas

Gear, 1st (standard)(41-tooth)

Traxxas

Disc, brake/ hub, adapter/2mm pin

Traxxas

Pads, brake/ cap screws

Traxxas

Screws, 3x10mm flat-head machine (hex drive) (4)

Traxxas

Engine mount, screws (Nitro 4-Tec)

Traxxas

Stub axle (2)

Traxxas

Tie rods/ upper camber rods (rear) (24mm turnbuckles) (4)/ draglink, 36mm (threaded rod)

Traxxas

Ball differential, Pro-style (with bearings)

Traxxas

Brace, rear (grey)

Traxxas

Brace, rear

Traxxas

Stiffeners, chassis (L&R)

Traxxas

Side plates, rear (L&R)/ belt tension cams (2)

Traxxas

Gear, clutch (2nd speed)(20-tooth)(standard)

Traxxas

Clutch bell