Traxxas Yedek Parçalar

Traxxas

Skid plates (F&R)/ fiberglass transmission spacer plate

Traxxas

Clutch bell, (18-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4609 - ball bearings, 5x10x4mm (2))

Traxxas

Hanger wire, universal (6-inches, cut and bend to suit)

Traxxas

Spring, throttle return (2) (Revo)

Traxxas

Shafts, idler gear (lightweight 7075-T6 aluminum hard-anodized/ PTFE-coated)

Traxxas

Washer, PTFE-coated 6x8x0.5 (10)

Traxxas

Screws, 3x28mm cap-head machine (hex drive) (6)/ 3x6mm ELW (6)

Traxxas

Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differnential)

Traxxas

Driveshaft/ stuffing tube/bushings (self-lubricating) (2)

Traxxas

Driveshaft coupler U-joint

Traxxas

Motor drive cup/ set screw

Traxxas

Stub axle carriers (2) (requires 5x11x4mm bearings)

Traxxas

Servo saver w/adapters

Traxxas

Clutch bell (N. Vee)

Traxxas

Cone, split beveled

Traxxas

DC Power adapter for TRX Power Charger

Traxxas

Servo mounts (2)/ screws (6)

Traxxas

Screws, 2x6mm roundhead self-tapping (6)

Traxxas

Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX 2.5, 2.5R, 3.3)

Traxxas

Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw

Traxxas

Receiver, 3-channel

Traxxas

Servo case (for 2070 servo)

Traxxas

Digital Ball Bearing Servo

Traxxas

Servo case/gaskets (for 2065 waterproof sub-micro servo)

Traxxas

Servo case (for 2060 sub-micro servo)

Traxxas

Servo case (for 2018 servo)

Traxxas

Silicone diaphragms (4)

Traxxas

Bushings, self-lubricating (10) (marine drive system)

Traxxas

Trim adjustment bracket (inner)/ trim adjustment bracket (outer)/trim adjustment lever/ 3x16mm shoulder screw/ 2.6x 10mm self-tapping screws (4)/ convex and concave trim lever washers/ 4x21mm double shoulder screw/ brass washers/ nuts

Traxxas

Rod, connecting (TRX 2.5, 2.5R, 3.3)

Traxxas

Header spring/ gaskets (TRX 2.5, 2.5R, 3.3)

Traxxas

Ball bearing (1)(10x19x5mm)

Traxxas

Body washers, foam adhesive (10)

Traxxas

Transmission output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (1) & M4/18.5 (1)

Traxxas

Turnbuckles, toe links (5.0mm steel) (front) (2)

Traxxas

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)

Traxxas

Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

Traxxas

Crankcase, without bearings (TRX 3.3) (requires #5223 ball bearings)

Traxxas

End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX 2.5, 2.5R)

Traxxas

Fuel Tank (125cc)

Traxxas

Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo brake bolts) (6)

Traxxas

Fuel tank (75cc)/ rubber vibration cushions (2)

Traxxas

Brake cam (blue-anodized)/ cam lever

Traxxas

Ultra Shocks (grey) (short) (complete w/ spring preload spacers & springs) (2)

Traxxas

Hardened Steel, Titanium Nitride-coated Shock Shafts (32mm)

Traxxas

Control arms, upper (2)/ upper rod ends (with ball joints installed) (2)/ 4x20mm set (grub) screws (2)

Traxxas

15-Groove Aluminum Pulleys

Traxxas

Aluminum tuned pipe & header (complete w/mounting hardware) (strong power across mid and upper RPM range) (blue-anodized)

Traxxas

Body, Ultra Shock(s) (short) (grey) (2)

Traxxas

Wiring harness for RX Power Pack, Traxxas nitro vehicles (includes on/off switch and charge jack)