Traxxas Yedek Parçalar

Traxxas

Trim adjustment bracket (inner)/ trim adjustment bracket (outer)/trim adjustment lever/ 3x16mm shoulder screw/ 2.6x 10mm self-tapping screws (4)/ convex and concave trim lever washers/ 4x21mm double shoulder screw/ brass washers/ nuts

Traxxas

Rod, connecting (TRX 2.5, 2.5R, 3.3)

Traxxas

Header spring/ gaskets (TRX 2.5, 2.5R, 3.3)

Traxxas

Ball bearing (1)(10x19x5mm)

Traxxas

Body washers, foam adhesive (10)

Traxxas

Transmission output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (1) & M4/18.5 (1)

Traxxas

Turnbuckles, toe links (5.0mm steel) (front) (2)

Traxxas

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6)

Traxxas

Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

Traxxas

Crankcase, without bearings (TRX 3.3) (requires #5223 ball bearings)

Traxxas

End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX 2.5, 2.5R)

Traxxas

Fuel Tank (125cc)

Traxxas

Screws, 3x21mm button-head machine (hex drive) (partially threaded, Revo brake bolts) (6)

Traxxas

Ball bearings, blue rubber sealed (6x12x4mm) (2)

Traxxas

Fuel tank (75cc)/ rubber vibration cushions (2)

Traxxas

Brake cam (blue-anodized)/ cam lever

Traxxas

Ultra Shocks (grey) (short) (complete w/ spring preload spacers & springs) (2)

Traxxas

Hardened Steel, Titanium Nitride-coated Shock Shafts (32mm)

Traxxas

Control arms, upper (2)/ upper rod ends (with ball joints installed) (2)/ 4x20mm set (grub) screws (2)

Traxxas

15-Groove Aluminum Pulleys

Traxxas

Aluminum tuned pipe & header (complete w/mounting hardware) (strong power across mid and upper RPM range) (blue-anodized)

Traxxas

Body, Ultra Shock(s) (short) (grey) (2)

Traxxas

Wiring harness for RX Power Pack, Traxxas nitro vehicles (includes on/off switch and charge jack)

Traxxas

Hard-anodized Aluminum Shock Caps

Traxxas

Bellcrank bushings (plastic) (5x8x2.5mm) (4)

Traxxas

White plastic washers (5x8x1.0mm) (6)

Traxxas

Antenna caps, vinyl (2)/ antenna spool

Traxxas

Gear set (for 2080 micro waterproof servo)

Traxxas

Collars, screw (2)/ set screws, 3mm (2)

Traxxas

Screws, 3x12mm button-head machine (6) (starter attachment screws with Threadlock)

Traxxas

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Traxxas

Wheels, Rally (white) (2)

Traxxas

Bumper, front/ bumper mount, front

Traxxas

Driveshaft assembly, inner (1) (fits front & rear, differential side)

Traxxas

Header, exhaust (Jato) (tubular aluminum, clear anodized) (TRX 2.5, 2.5R, 3.3)

Traxxas

Bumper, front

Traxxas

Dirt guards, chassis (left & right)

Traxxas

Bumper, rear (for use with mid-mounted RX battery)

Traxxas

Suspension pin set, complete (hardened steel, front & rear), 3x27mm (4), 3x35mm (2), 3x52mm (4)

Traxxas

Body mount, front

Traxxas

Body, GTR shock (aluminum) (1)

Traxxas

Bellcrank mounts, throttle (long & short)

Traxxas

Gear, differential output (Revo center diff, front or rear without rear brake kit (5417))

Traxxas

Gear, differential output (Revo center diff, rear with rear brake kit (5417)) This shaft is longer and allows the use of the 5417 rear brake kit. Use 5416 for non-brake applications.

Traxxas

Gear, center differential (Revo)/ X-ring seals (2)/ gasket (1) (Replacement gear for 5414)

Traxxas

Reverse upgrade kit (includes all parts to add reverse to SportMaxx)(includes 2018 servo)

Traxxas

Body clips, heavy duty (12)

Traxxas

Ring gear, differential/ pinion gear, differential

Traxxas

Ball bearings, blue rubber sealed (12x18x4mm) (2)

Traxxas

Chassis brace, Revo (3mm 6061-T6 aluminum) (blue-anodized)/ 4x16mm BCS (works with both extended and standard length chassis)